 |
 |
|  |
|
 |
|
 |
 |
|
|
|
|
|
 |
|
 |
|
 |
|
TB 110
The TB 110 can place concrete at high volumes up to 360 yd³ (275m³) an hour and convey a wide variety of materials ranging from sand to 4" rock. With its steel/aluminum truss and three aluminum sections, this four-section telescopic conveyor offers 106'1" (32.34m) of horizontal reach. The unit can set up and operate under heights as low as 15' 9" (4.80m).
|
|
|
|
|
|
|
|
|
|
|
| Height and Reach |
Conveyor horizontal reach:
maximum at 0° |
106'1" |
(32.34m) |
Conveyor horizontal reach:
maximum at 30° |
91'6" |
(27.91m) |
| Conveyor belt width |
18" |
(457mm) |
| Feed conveyor length |
38' |
(11.60m) |
| Feed conveyor belt width |
18" |
(457mm) |
| Trunk/end hose length |
15' |
(4.57m) |
Discharge height from grade:
maximum at 30° |
60'2" |
(18.36m) |
Discharge height from grade:
maximum at -15° |
-20' |
-(6.11m) |
Rated capacity at 0°:
main and feed conveyors |
360 yd³/hr |
275m³/hr |
Rated capacity up to 20°:
main and feed conveyors |
230 yd³/hr |
175m³/hr |
| Outriggers |
| Net reach beyond outriggers at 0° |
100'6" |
(30.65m) |
| Net reach beyond outriggers at 30° |
86' |
(26.23m) |
| Outrigger spread: |
|
|
| Front, swing out hydraulic up/down |
23'1" |
(7.05m) |
| Rear, swing out hydraulic up/down |
26'9" |
(8.17m) |
|
All TB 110 specs based on Model MACK MR 688S.
Maximum theoretical values listed above. |
|
| Based on Model Mack MR 688S |
| Steering |
19,253 lbs |
8,733kg |
| Pusher |
11,000 lbs |
4,989kg |
| Tandem |
31,274 lbs |
14,185kg |
| Total |
61,527 lbs |
27,907kg |
|
|
Specification Drawing
 |
Click Image to Enlarge |
Weights are approximate and include, truck, full hydraulic oil, driver and some fuel. Dimensions will vary with different truck makes, models and specifications.
|
|
|
|
|
|
 |
| Copyright © 2005 L. Guerini Group Inc. |
· · · · · |
|
 |
|
|
 |
|  |
|
|
